Product package for you with direct electrical heating (with wall-mounted radiators, non-storing underfloor or ceiling heating) and/or possible heat-storing or partially storing underfloor heating. Also for houses with a combination of these in different parts of the building. System also controls your possible domestic hot water tank.
System secures desired inside temperatures and minimizes the cost of electricity used for heating. The savings are made by reducing the amount of heating energy by lowering temperatures in various living situations according to your expectations, and shifting heating to less expensive hours. This is done by taking into account building insulation (heat storage capacity), weather forecast, electricity spot price and allowing a temperature variation range defined by you.
The product consists of three devices: central unit, control relay and one temperature sensor. Your home temperature is controlled based on the temperature measurement.
You can expand the package with needed amount of additional temperature sensors if your home has more than one floor or wing, or different heating methods in different areas. You can also connect possible air-to-air heat pumps to it.
Product package for you with waterborne underfloor electrical heating, with a water tank of at least 1 500 liters. System also controls your possible separate domestic hot water tank.
System secures desired inside temperature and minimizes the cost of electricity used for heating. The savings are made by shifting heating of the tank to less expensive hours. This is done by taking into account the daily heating energy needed by the building, depending on outside temperature, and selecting the cheapest hours to produce the energy.
The product consists of three devices: central unit, control relay and one temperature sensor. Your home temperature is controlled by room thermostats as before. The measured temperature is indicated to you in user interface.
You can expand the package by connecting possible air-to-air heat pumps to it.
You can open/close:
1. All questions under one topic (by clicking the topic)
2. Answer to one question (click “+/-“)
3. All questions and answers under all topics (click ”Expand/Collapse all”)
No worries. The system is designed to take into account the loss of communication to cloud. First, it sends you an alarm in a way you have specified (either an SMS, or email, or both). Second, the equipment at your home continues to operate as before. It does not receive new electricity prices and temperatures from cloud, but will operate sufficiently well with old values.
NOTE: Most importantly, no failure situation will leave your home without heating. Fault conditions have been designed “fail-safe”, with your heating always on. You just miss the best savings.
Central unit needs a permanent communication connection to our cloud service. There are three ways to do that: (1) We recommend that your fixed home broadband connection is used. (2) A mobile connection can also be used, but in that case it must be permanently located in your home so that communication is not interrupted. (3) If you want, we can sell you a dedicated 4G USB modem and connect it to the central unit. Also that works fine.